Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterOlympia Chimney Chimney Liner & Rebuild in Pasadena: What to Know First
We provide independent Olympia Chimney chimney liner and rebuild service in Pasadena, with most liner replacements completed in one day and full rebuilds scheduled within a week of your written approval. Every job starts with a camera-scan inspection and ends with a documented photo record, a written warranty, and our 365-Day Done Right Promise. We’re not here to sell you a liner you don’t need - we’re here to show you what the camera found, name the price in writing, and let you decide.
This page is for Olympia Chimney owners in Pasadena, Altadena, and nearby who’ve been told they need liner work or masonry repair and want a second opinion backed by evidence. Corrine Halstead and our crew have handled Olympia Chimney systems in everything from 1920s Bungalow Heaven craftsmans to newer builds near the Arroyo Seco, and we know where these products hold up and where they don’t. Call (213) 459-6058 for a free estimate, or bring us a competitor’s written quote for our free second opinion.
How Olympia Chimney Products Fail - and How We Fix Them
- Olympia Chimney stainless steel liner collars crack at the flue top in the 304-Alloy Standard Series. The 304 alloy is rated for wood-burning duty, but Pasadena’s combination of marine moisture from the southwest and rapid temperature swings in winter causes collar fatigue at the termination point. We replace with 316Ti alloy collars through our Haven buying network, which handle the thermal cycling without the upsell to a full liner replacement if the flue body is sound.
- Olympia Chimney flexible liners in the ProFlex line develop longitudinal creasing above the smoke chamber. This happens when the original installer didn’t account for the offset in Pasadena’s older masonry - the Bungalow Heaven neighborhood is full of chimneys with 15- to 20-degree offsets that stress the corrugation. We pull the damaged section, measure the actual offset with a laser guide, and install a properly sized ProFlex or transition to DuraFlex if the geometry demands it.
- Olympia Chimney’s gelcast refractory panels in the HeatForm liner system spall after 8-12 years in Pasadena’s hard-water zones. The mineral content in local water accelerates surface degradation when condensation mixes with combustion byproducts. We assess whether HeatShield resurfacing can restore the panel or if a full Olympia Chimney liner replacement is the honest call - and we show you the camera footage before we quote either.
- Olympia Chimney rigid 316Ti sections separate at the locking seams in earthquake-prone installations. Pasadena sits on the Raymond fault trace, and the micro-movements that don’t damage brick still work seam joints loose over five to seven years. We find these separations with our camera scan, reseat with proper expansion allowance, and document the repair for your insurer under Haven Standard Clause 4.
- Olympia Chimney chimney caps in the Gelco line corrode at the base flange faster than the cap body. The flange is often 430-grade stainless for cost reasons, and Pasadena’s occasional Santa Ana wind events drive salt and grit into the seam. We source full 316-grade replacement caps through our Copperfield supply line, or fabricate a custom fit if your flue size is non-standard from a previous rebuild.
Our Olympia Chimney Chimney Liner & Rebuild Process
- 1
Call and schedule. A live person answers 24/7. We book your camera inspection, send you a text with your technician’s name and photo, and alert you when they’re en route.
- 2
NFPA 211 Level 2 inspection. We run the camera the full flue length, record the footage, and check liner condition, crown integrity, and creosote class. The camera doesn’t negotiate - it just shows what’s there.
- 3
Written price and scope. Corrine Halstead reviews the footage with you, explains what we found in plain terms, and delivers a written price with parts specified: Olympia Chimney OEM, DuraFlex, HeatShield, or Gelco depending on what’s right for your system. No work starts until you approve in writing - Haven Standard Clause 1.
- 4
Repair or rebuild. For liner replacement, we pull the old liner, inspect the flue walls, and install the new system with proper sizing and clearance. For rebuilds, we work course by course with matching brick and mortar, installing a new liner as the masonry goes up.
- 5
Post-work testing and documentation. We run a smoke test or draft measurement, verify proper operation, and provide your photo record, written warranty, and 365-Day Done Right Promise documentation - Haven Standard Clause 4.
- 6
Cleanup and follow-up. We haul away all debris, protect your floors and landscaping, and check in at 30 days to confirm performance.
BeforeAfterWhat Olympia Chimney Chimney Liner & Rebuild Costs in Pasadena
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Olympia Chimney flexible liner replacement (ProFlex or equivalent) | $2,800 - $4,200 | Flue length, number of offsets, access difficulty (steep roof, tight chase) |
| Olympia Chimney rigid 316Ti liner replacement | $3,400 - $5,600 | Diameter, seam count, whether the smoke chamber needs parging |
| Partial chimney rebuild with new liner (above roofline) | $4,500 - $7,800 | Courses to rebuild, matching brick sourcing, crown reconstruction |
| Full chimney rebuild with Olympia Chimney liner system | $8,500 - $14,000 | Foundation condition, height, interior firebox work, permit requirements |
| HeatShield or Gelco liner resurfacing (if candidate) | $1,800 - $3,200 | Surface area, depth of spalling, access |
These are real ranges for Pasadena-area jobs we’ve completed, not teaser prices. The only way to know your exact number is to see the flue. Call (213) 459-6058 for a free estimate - estimates are free, and our second opinion on any written competitor quote is free too.
Why Pasadena Homeowners Call Level Two Chimney Pasadena for Olympia Chimney Work
We’ve inspected and cleaned more than 38,000 chimneys since 2009, and every one had a written price before work started and a documented record when finished. Corrine Halstead and our background-checked, uniformed technicians know Olympia Chimney products specifically - we stock common ProFlex and 316Ti fittings, and our Haven buying network gives us same-day access to DuraFlex, HeatShield, and Gelco when an Olympia Chimney part isn’t the right fix or isn’t available quickly enough.
Our 365-Day Done Right Promise means if it’s not done right, we make it right. No voicemail trees, no surprise charges, no work without your written approval. That’s Haven Standard Clause 1, and it’s how we’ve operated since 2009.
FAQs
No - if the work is performed by a qualified technician using Olympia Chimney-compatible materials and methods. As an independent Olympia Chimney service provider, we follow manufacturer installation specs precisely and document our work so any future warranty claim has supporting evidence. We also source OEM parts when they’re the right choice, or specify quality aftermarket alternatives when they perform better for your specific flue geometry. Call (213) 459-6058 if you’ve received conflicting information - we’ll review your warranty terms with you.
Most flexible or rigid liner replacements are completed in one day. A full chimney rebuild with liner installation typically takes three to five days, depending on masonry curing requirements and Pasadena’s weather. We schedule with realistic timelines and update you if anything changes - no phantom “we’ll be there between 8 and 5” windows. Call (213) 459-6058 to check current availability.
Sometimes. Small cracks or localized spalling in a HeatForm or gelcast liner may qualify for HeatShield resurfacing, which we perform when the damage is superficial and the underlying structure is sound. We don’t guess - we camera-scan, show you the footage, and tell you honestly whether repair or replacement is the safe call. If a competitor has already quoted replacement, bring us their written estimate for a free second opinion.
We stock common Olympia Chimney ProFlex and 316Ti fittings at our Pasadena warehouse, and our Haven buying network gives us next-day access to DuraFlex, HeatShield, Gelco, Famco, and Copperfield products. For specialty or discontinued Olympia Chimney components, we source direct or fabricate a compatible solution - we don’t leave you heating-less while a part crosses the country. Call (213) 459-6058 to confirm availability for your specific model.
The camera decides, not a sales pitch. We look for: liner separation or corrosion (repair or replace), structural masonry failure like spalling brick or missing mortar (rebuild), and clearance violations or improper sizing that create a fire or CO hazard (replace or rebuild). After our inspection, you’ll have the footage, a written diagnosis, and a written price for each option that applies to your chimney. No recommendation comes without evidence you can see for yourself. Call (213) 459-6058 to schedule your camera inspection - estimates are free.
Written by Corrine Halstead, Owner, Level Two Chimney Pasadena at Level Two Chimney Pasadena, serving Pasadena and nearby areas.